Aten RS-232 to RS-485/RS-422 Adapter Item # 182310
Thank you, you will now be redirected to comparisons.
Just a moment while we prepare the page
Check In-Store Availability
The IC-485S and IC-485SN represent hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration.
|Additional Information||Data transmission controlled by the RTS signal; DCE or DTE selectable switch; Point to point, multidrop, and simplex/duplex link selection; Four wire full duplex & two wire half duplex; Non powered operation; Bi-Directional|
|Connector on First End||1 x 25-pin DB-25 Female RS-232 Serial|
|Connector on Second End||1 x 4-pin; 1 x RJ-11|