B+B RS-232 Data Tap Item # 3457368
Thank you, you will now be redirected to comparisons.
Just a moment while we prepare the page
Check In-Store Availability
On the Data Tap the male RS-232 connector on the top and the female RS-232 connector on the bottom are connected straight through, pin for pin. These connectors are used to connect the Data Tap in series with the RS- 232 line to be tapped. Either the Transmit Data from pin 2 or the Receive Data from pin 3 can be brought out to the Tap Connector. Pin 1, Protective Ground, and pin 7, Signal Ground, of all three connectors are interconnected.
The small switch is used to program the Tap Connector. The bottom two switches pick Receive Data (RD) or Transmit Data (TD) to be sent to the Tap Connector. (See the markings near the switch.) When the RD switch is on, only mainline Receive Data is sent to the Tap Connector. When the TD switch is on, only mainline Transmit Data is sent to the Tap Connector. When both switches are on, both the Transmit Data and the Receive Data are sent to the Tap Connector.
|Connector on Second End||1 x 25-pin DB-25 Male RS-232 Serial|
|Connector on First End||2 x 25-pin DB-25 Female RS-232 Serial|
|Product Name||RS-232 Data Tap|
|warranty length||limited lifetime|