This promotion is for Rewards members only. To take advantage of exclusive offers like these, join Office Depot® OfficeMax® Rewards now!
Tripp Lite HDMI over Cat5 Cat6 4x4 Matrix Video Extender Switch HDMI RJ45 F/F TAA Item # 4036536
Thank you, you will now be redirected to comparisons.
Just a moment while we prepare the page
Check In-Store Availability
The B126-4X4 4-port HDMI over Cat5/Cat6 Matrix Splitter Switch works with Tripp Lite remote receivers to share one or more HDMI sources between multiple projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, retail and other applications where the video sources are located farther than conventional cables allow or that require multiple displays connected to one source.It uses HDMI cable(see Tripp Lite's P568-Series) to connect to the sources and Cat5e/6 cable to transmit to the remote monitors(for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series). Any video source can be routed to any monitor, or you can send the same source to multiple monitors. Switch between inputs via pushbuttons, RS-232 serial or the included remote control.When used with Tripp Lite's B126-1A0 or B126-1A0-WP-1 active remote receivers, the switch can extend a 1080i(60 Hz) signal up to 53.34 m (175-ft.) or a 1080p signal(60 Hz) up to 38.1 m (125-ft.) With a B126-1P0 or B126-1P0-WP-1 passive remote receiver, it can extend a 1080i(60 Hz) signal up to 22.86 m (75-ft.) and a 1080p(60 Hz) signal up to 15.24 m (50-ft.) Add up to three B126-110 remote repeaters to each channel to fully extend the signal range or add more displays.In addition to crystal-clear video, the B126-4X4 delivers full, rich stereo. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.
|brand name||Tripp Lite|
|Certifications & Standards||Taa|
|Graphics Modes||Full HD|
|Maximum Operating Distance||175 ft|
|Maximum Video Resolution||1920 x 1080|
|Media Type Supported||Twisted Pair|
|Number of Displays Supported||4|
|Number of Input Devices Supported||4|
|package contents||HDMI over Cat5 / Cat6 4X4 Matrix Switch; External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output B126-2X2: 5V, 2A; 3.5 mm to DB9 Adapter Cable ( serial ); Mounting Hardware; Remote Control; Owner's Manual; IR extension Cable|
|ports||4 connectivity (RJ-45); 4 HDMI in; 1 serial|
|warranty length||1-year limited|
|Show More ▾|
Share Four HDMI Video Sources Between Multiple Displays using Cat5/6 Cables
|Tripp Lite’s B126-4X4 HDMI over Cat5/6 Matrix Splitter Switch and Transmitter Unit allows you to share high-definition video and audio from four HDMI-enabled digital video components to four different monitors. When used with Tripp Lite Active HDMI receivers* (B126-1A0 or B126-1A0-WP-1), the B126-4X4 can extend a 1080p signal up to 125 ft., and 1080i signal up to up to 175 ft. (use Tripp Lite’s N202-Series 24AWG, Solid Wire Cat5e/6 cable for maximum distance and resolution). The B126-4X4 is HDCP- and EDID-compatible and provides you with a variety of installation options. Plug-and-play convenience makes for an easy, efficient setup and switching between inputs is simple via pushbuttons, remote, or RS232 serial control options. By daisychaining three units together, you can connect up to 4 monitors per video channel. The B126-4X4 comes with a one-year warranty and is TAA-compliant for GSA-schedule purchases. * A B126-Series remote receiver is needed at each monitor (sold separately).|