Rated 3.6 out of 5�by 5
Rated 4 out of 5�by jusgra98 Works as advertised
Just a note about setting the default gateway -- it can't be set from the application that installs from the CD but it can be set from the web interface.
September 25, 2013
Rated 5 out of 5�by Ken4282 Works in large networks!
The print server got updated so that it works in large networks with multiple subnets! When you are setting a static IP you can now configure a default gateway as well. The firmware update for this is available on the support page if you happen to have an older unit. http://sites.dymo.com/Support/Pages/ProductDetails.aspx?ProductID=1750630%28DYMO%29
April 19, 2013
Rated 3 out of 5 Very limited device for a Large LAN
The device works well in a singe subnet LAN environment. We were not aware this would not work in a multiple subnet environment. The description of the device and the manual do not mention this limitation. I had to find out by searching through the FAQ when I realized during configuration that I could not configure a manual gateway. This needs to be stated up front. Hoping we can return this item for a full refund.
February 24, 2012
Rated 1 out of 5 DO NOT BUY IF USING MULTIPLE SUBNETS
This was purchased for a small department of a larger company. The company has several IP address ranges that are in use and unfortunately, per tech support, the device can only work on one subnet. This is strange as most devices allow you to enter a default gateway that would allow the device to be accessed by multiple subnets, but for whatever reason, this device does not. Needless to say, we will be returning it.
January 10, 2012