This promotion is for Rewards members only. To take advantage of exclusive offers like these, join Office Depot® OfficeMax® Rewards Everything now!
Tripp Lite PDU Metered ATS 200-240V 16/20A 8 C13; 2 C19; 2 C20 1URM Item # 819686
Thank you, you will now be redirected to comparisons.
Just a moment while we prepare the page
Check In-Store Availability
Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.
|brand name||Tripp Lite|
|Frequency Provided||50/60 Hz|
|Input Connectors||2 x power IEC 60320 C20|
|Input Receptacles||2 x IEC 60320 C20|
|Input Voltage||200 V AC; 208 V AC; 230 V AC; 240 V AC|
|Output Receptacles||2 x IEC 60320 C19; 8 x IEC 60320 C13|
|Output Voltage||200 V AC; 208 V AC; 220 V AC; 230 V AC; 240 V AC|
|package contents||Metered PDUMH20HVAT 10-Outlets PDU; User Manual With Warranty Information|
|warranty length||2-year limited|
|Weight (Approximate)||10.30 lb|
|Show More ▾|
3.2-3.8kW Single-Phase Power Distribution with Digital Meter and Redundant Power
|Tripp Lite's PDUMH20HVAT provides robust single-phase power distribution that’s ideal for mission-critical IT environments. This PDU delivers reliable 20A 200/208/240V power to eight C13 outlets and two C19 outlets. A digital meter lets you locally monitor current and load, and a built-in Automatic Transfer Switch (ATS) provides a redundant power option. It’s suitable for 1U (horizontal) rackmount installation and is reversible to face the front or back of the rack.|
Unfiltered electrical pass-through makes the PDUMH20HVAT ideal for distributing alternate waveform utility, UPS or generator power in rack enclosures and network closets. It provides 200-240V single-phase power service via eight C13 and two C19 outlets. The outlets are programmed for sequential turn-on to prevent in-rush equipment interaction on startup. The 12-ft. cords give you flexibility in placement. It has a rugged all-metal reversible housing and two IEC-320 C20 input plugs. Total load capacity: 3.2kW (200V), 3.33kW (208V), 3.52kW (220V), 3.68kW (230V), 3.84kW (240V).
This PDU provides a redundant power option for single-corded network devices. If the primary power source fails, an Automatic Transfer Switch will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within 2-5 milliseconds. An on-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source if it’s unavailable or of lower quality than the primary source. Two LEDs show the status of each power source.
A digital LED meter allows IT personnel to monitor the input voltage and load level locally. The meter helps ensure the PDU is used at maximum capacity with no danger of overload. Each outlet has a green LED that illuminates to confirm power on/off status.
A built-in card slot supports an optional SNMPWEBCARD to permanently upgrade this PDU’s C13 outlets to be remotely switched and monitored. With this network interface installed, automated alerts issue warnings when load levels exceed user-defined thresholds, identifying potential trouble spots and preventing accidental power loss and costly downtime.
For peace of mind, the PDUMH20HVAT comes backed by a two-year warranty. This PDU is manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite’s commitment to environmental responsibility.
- Automatic Transfer Switch provides a redundant power option for single-corded network devices
- Digital meter enables monitoring of total PDU load
- 1U horizontal rackmount installation
- Rugged all-metal reversible housing with eight C13 and two C19 outlets
- Two detachable 12-ft. C19 to C20 power cords
- 2-Year Warranty
What's in the Box?
- Metered PDU with ATS Support
- User manual with warranty information
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, protect, manage, house, cool, connect and mount your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosure cabinets, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.