Fluke Networks FI-7000-MPO 120 Cable Analyzer Item # 995350
Thank you, you will now be redirected to comparisons.
Just a moment while we prepare the page
Check In-Store Availability
End-face contamination is a leading cause of fiber failures. Dirt and contaminant cause insertion loss and back-reflection that inhibits optical transmission and causes havoc with transceivers. Fiber loss and OTDR testing can expose this problem, but in many cases, dirty connections make fiber testing time consuming and inaccurate.
Since dirt can be an issue before, during, or after fiber optic certification testing, and migrate from one end-face to another upon mating, both sides of any connection must always be cleaned and inspected. Further, mating contaminated connectors can cause permanent damage as microscopic debris is crushed between end-faces in physical contact. Even factory terminated patch cords or pigtails must be inspected as protective caps do not keep end-faces clean. Avoiding this common cause of failure, starts with inspecting the end-face and eliminating any contamination before insertion into a bulkhead or piece of equipment.
The FI-7000 FiberInspector Pro allows you to inspect and certify end-faces in 2 seconds so you can get the job done the first time. Automated PASS/FAIL certification take the guess work out of fiber inspection so anyone can be a fiber expert.
|Battery Life||11 Hour|
|battery type||lithium ion (Li-ion)|
|brand name||Fluke Networks|
|Certifications & Standards||EMC: EN 61326-1|
|Device Function||Fiber Optic Cable Testing|
|Input Voltage||7.2 V DC|
|warranty length||limited lifetime|
|Show More ▾|