Perle S-1000-S2SC10 - Fiber media converter - GigE - 1000Base-LX, 1000Base-LH, 1000Base-T - RJ-45 / SC single-mode - up to 6.2 miles - 1310 nm

Perle S-1000-S2SC10 - Fiber media converter - GigE - 1000Base-LX, 1000Base-LH, 1000Base-T - RJ-45 / SC single-mode - up to 6.2 miles - 1310 nm
1 / 1

Description

    • Default operating mode. In the default operating mode (all switches up), the media converter will auto-negotiate on both the fiber and the copper links at the same time, thus achieving the best end-to-end Ethernet operating parameters.
    • Error recovery. In certain configurations, and under specific conditions where the media converter brings down a link to convey status, there is potential for a deadlock. Recovery is achieved by momentarily restoring the link to see if the original failure has been resolved.
    • Status LED. The Perle gigabit media converters have three single color status LEDs located on the front panel of the unit.
    • Auto-MDI-X with skew correction. Auto-MDI-X (automatic medium-dependant interface crossover) detects the signaling on the 1000BASE-T interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection.