The B140-1P1-WP-1 is a DVI over cat5/6 passive extender wallplate kit, which comes with both transmitter and receiver units. It can transmit a DVI-D single-link signal using a single cat5e/6 patch cable. Rear-facing RJ45 female jacks allow for quick and easy connections. The B140-1P1-WP-1 is compatible with all operating systems, and is Plug and Play with no external power, software or drivers required.
|brand name||Tripp Lite|
|Graphics Modes||Full HD|
|Maximum Operating Distance||100 ft|
|Maximum Video Resolution||1920 x 1080|
|Media Type Supported||Twisted Pair|
|Number of Input Devices Supported||1|
|Number of Output Devices Supported||1|
|ports||1 DVI in; 1 DVI out; 2 Ethernet (RJ-45)|
|Twisted Pair Cable Standard||Category 6|
|warranty length||1-year limited|
|What's Included||B140-1P1-WP-1 Local Wallplate; B140-1P1-WP-1 Remote Wallplate; Wallplate screws; Owner's Manual|
DVI over Cat5e/6 Passive Wallplate Kit Extends a DVI-D Single-Link Signal 100 ft.!
|Don’t sacrifice quality for distance—extend a DVI signal up to 100 ft.! With Tripp Lite’s B140-1P1-WP-1 DVI over Cat5 Passive Wallplate Extender Kit, you can extend a 1920 x 1080 (60 Hz) signal up to 50 ft. away or a 1024 x 768 signal up to 100 ft. away using 24 AWG, Solid Wire Cat5/6 cable (Tripp Lite N202-Series, sold separately). This kit comes with both the local and remote connection units, allowing you to plug in and get started right away without any additional units needed. The wallplate form factor mounts in a standard single-gang outlet box. With no drivers or software to install, the B140-1P1-WP-1 provides total plug-and-play convenience. Unit comes with a one-year warranty.|
The B140-1P1-WP-1 wallplate is the perfect solution for digital signage applications like schools, churches, retail displays, trade show presentations, and any other place a high-resolution DVI signal needs to be delivered over a long distance. The B140-1P1-WP-1 wallplate allows the video source to be in a secure, remote location for controlled access while still delivering a high-resolution DVI signal to monitors, projectors, and other devices in another area.
Convenient Plug-and-Play Setup
With no software or drivers to install, the B140-1P1-WP-1 wallplate’s plug-and-play setup gets your application up and running faster. Simply connect the transmitter to the video source, connect the receiver to the display, and connect the units to each other with Cat5e/6 cable for crystal clear resolution.
The B140-1P1-WP-1 wallplate allows you to complete your DVI installation with a clean, professional appearance. The convenient wallplate form factor discreetly mounts in a standard single-gang outlet box for a clean, professional look. It does not require an AC adapter, so the only cable you’ll see on the display side is the DVI cable (Tripp Lite P561-series, sold separately) going from the wallplate to your monitor or projector.
The B140-1P1-WP-1 comes with a one-year warranty, is TAA-compliant for GSA schedule purchases, and features a green, RoHS-compliant design.
What’s in the Box
- B140-1P1-WP-1 Local Wallplate
- B140-1P1-WP-1 Remote Wallplate
- Wallplate Screws
- Owner’s Manual
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect and protect your equipment. With a large selection of connectivity products, Tripp Lite has everything from USB hubs and reversible USB cables to fiber-optic cables and over Cat5e/Cat6 signal extenders. Whether you need to connect high-speed networks to switches, routers and servers in your data center, or send high-resolution video signals to displays and digital signs, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.
Thank you, you will now be redirected to comparisons.
Just a moment while we prepare the page
Check In-Store Availability