This promotion is for Rewards members only. To take advantage of exclusive offers like these, join Office Depot® OfficeMax® Rewards now!
Tripp Lite 42U Value Series Rack Enclosure Server Cabinet Doors & Sides Item # 847560
Thank you, you will now be redirected to comparisons.
Just a moment while we prepare the page
Check In-Store Availability
Tripp Lite's SmartRack 42U Value Series Standard-Depth Rack Enclosure Cabinet is designed for secure, high density server and networking applications in IT environments. Designed with provisions to integrate cooling, power distribution and cable management, SmartRack enclosures make ideal homes for mission-critical equipment. Toolless mounting accessory slots allow quick installation of PDUs and vertical cable managers. Lightweight modular doors and side panels provide safe, convenient service access. SmartRack enclosures support cooling, cable management, power distribution and monitoring features that keep critical servers and network equipment operating nonstop.
|Application/Usage||Server; LAN Switch; PDU|
|brand name||Tripp Lite|
|Certifications & Standards||EIA; ECA-310-E; IP20|
|Dynamic/Rolling Weight Capacity||1500 lb|
|Rack Depth||29.75 in.|
|Static/Stationary Weight Capacity||2000 lb|
|warranty length||5-year limited|
|Weight (Approximate)||169.40 lb|
|What's Included||SR2000 SmartRack Economy Rack Enclosure Cabinet; 1 x Key Sets for Front / Rear Doors, and Side Panels; 40 x M6 Cage Nuts; 40 x M6 Screws; 40 x M6 Nylon Washers; 2 x Stabilizer Brackets; Owner's Manual|
|Show More ▾|
42U Value Series Rack Enclosure Optimized for High-Density IT Environments
|Designed to integrate cooling, power distribution and cable management into an easy-access cabinet, the SR2000 42U SmartRack® Value Series Standard-Depth Rack Enclosure is ideal for secure, high-density server, telecommunications and networking applications. It ships fully assembled with toolless mounting accessory slots for quick 0U installation of vertical PDUs and cable managers. The textured powder-coat finish resists wear and tear common in server room and warehouse environments.|
The SR2000 is compatible with all EIA-310-E-compliant 19-inch equipment, as well as today’s state-of-the-art hot-aisle/cold-aisle configurations. The front and rear doors are perforated to allow maximum airflow, and the rack is fully compatible with a wide range of airflow optimization and cable management accessories. Four baying connection points make it easy to combine multiple rack enclosures in rows. Standard 24-inch width and 40-inch depth make good use of limited floor space.
Toolless Vertical Mounting Brackets
The SR2000’s adjustable vertical mounting brackets support toolless button-mount 0U installation to accommodate four vertical PDUs or cable managers. These brackets not only make it easier to route power and cabling to installed rack equipment, but they also reduce cord and cable clutter that could block airflow through the enclosure.
The SR2000 is designed to provide a safe, secure solution for mission-critical rack-mounted equipment. The front and rear doors and side panels lock securely with the included keys to prevent unauthorized access to equipment. The doors and panels can also be removed to make it easy for IT personnel to perform inspections and maintain and replace equipment.
Vented Top and Bottom Panel with Cable Ports
The removable top panel is furnished with vents designed to help remove warm air from the enclosure cabinet and draw in cool air by convection. It also supports installation of standard user-supplied case fans. Both the top and bottom panels provide ports for convenient cable routing and management.
All SR2000 components are grounded to the enclosure frame. Connect the SR2000’s front or rear threaded grounding point to your facility’s earth ground connection with an 8 AWG wire and the included M6 screw. Route the ground wire under the frame to ensure the doors can open and close unhindered.
Preinstalled Casters and Leveling Feet
To simplify deployment, the SR2000 comes with preinstalled casters and leveling feet. The casters let you easily roll the enclosure to its desired location, where it can then be secured in place by adjusting the levelers. The SR2000 has a rolling load capacity of 1,100 lb., enabling rack equipment to be installed in the enclosure cabinet prior to final deployment. Note: The casters are intended for minor position adjustments within the final installation area only. They are not designed for moving the enclosure over long distances.
Simple Equipment Installation
The SR2000 features front and rear pairs of vertical mounting rails with unthreaded square holes that adjust to accommodate equipment depths from 22 ⅝ inches to 29 ¾ inches and a stationary load up to 2,000 lb. Adjustment is quick and convenient—simply unscrew the rails, slide them to the desired depth and restore the screws. An easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space is numbered for ready reference.
5-Year Warranty, PCI Compliance and Environmentally Responsible Design
The SR2000 comes with a 5-year product warranty and meets all requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance. It’s manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite’s commitment to environmental responsibility.
- SmartRack Value Series rack enclosure ideal for high-density IT environments
- 42U of rack
space with a 2,000 lb. stationary load capacity
- Compatible with all EIA-310-E-compliant 19 in. equipment
- Adjustable front and rear rails accommodate mounting depths from 22 ⅝ in. to 29 ¾ in.
- Locking, removable front and rear doors and side panels
- Removable, vented top panel and bottom panel contain convenient cable ports
- Preinstalled casters provide rolling load capacity of 1,100 lb.
- Ships fully assembled for quick installation
- 5-year warranty
- Meets all requirements towards PCI DSS compliance
- SR2000 42U SmartRack Value Series Standard-Depth Rack Enclosure
- (40) M6 Cage Nuts
- (40) M6 Screws
- (40) M6 Nylon Washers
- (2) Stabilizer Brackets
- Owner’s Manual
Founded in 1922 in Chicago, Illinois, Tripp Lite is a leading manufacturer of products to power, connect, house and protect your equipment. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Whether you need to supply power to servers and have reliable battery backup, connect high-resolution video sources to displays and digital signs, or organize and secure IT equipment in rack enclosures, Tripp Lite has the complete solution. Plus, before and after your purchase, our Chicago-based, in-house technical support specialists are available to assist you by phone, email and live chat. With over 90 years of quality products and service, Tripp Lite is a brand you can trust.