C2G USB Extender

The USB 1.1 Superbooster Extender for Interactive Whiteboards is perfect for extending 1.1 signals up to 40 m (131 feet) to support any interactive whiteboard. Other USB extension solutions use a chipset that is incompatible with interactive whiteboards which can cause dropped signals and/or periodic spikes when the solutions are used together. The C2G Superbooster conquers USB length limitations and allows the interactive whiteboard to be installed in the best location. The booster is powerful yet simple, with no drivers to install or special software required, so it's compatible with any computer that supports USB.This Plug-and-Play device consists of a wall plate transmitter unit and a dongle receiver unit connected together by a standard Cat5, Cat5E, or Cat6 network cable. Simply connect a USB cable from the IWB to the receiver, connect a Cat5 cable from the receiver to the transmitter, then connect the transmitter to an available USB port on the computer and the system is up and running. Bus-powered, the extender requires no external power source; instead, the Superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device. No external power is required for either the base or remote units. The USB 1.1 Superbooster Extender is compliant with the USB specification 1.1.